Home > Events > Content
Zipper maintenance tips
- Aug 16, 2018 -

1. When using it normally, pay attention to whether there are any problems such as “breaking belly”, “de-toothing” and skewing on the zipper. If you have these problems, repair them in time and do not pull them hard. If the zipper is loose and toothed, use a small hammer to tap a few times on the zipper head to make the upper and lower chain teeth bite tightly, and then no more teeth will be removed.

2, the zipper of aluminum alloy is more susceptible to corrosion, so it should be kept dry, do not get damp, to prevent the aluminum tooth from forming white oxide, it will cause zipper rust, affecting the use, and also pay attention to the alkaline Contact with acidic substances. Keep a certain degree of ventilation during storage, do not seal it, do not store it in a humid atmosphere, or use moisture-proof paper or dehumidifier if necessary. If the zipper is damp and pulls up, then pull the zipper out, then apply some wax to the zippered teeth and bake it with fire. This is very lubricious when used.

3. When pulling the zipper, first align the teeth on both sides, then pinch the zipper head and gently pull forward along the track. Do not forcefully pull it to avoid “tooth skew”, “breaking belly” and “toothing”. . If the zipper is bun and the pull is not flexible, you can wipe it with a cloth and then apply a layer of white wax on the “teeth”.

4, all kinds of bags, pockets or wallets with zippers, do not overfill, otherwise it is easy to cause the zipper to "break the belly", "toothing", skew and soft cloth